Liked the video? Help us make more at
Page 5 X-CORE COMPONENTS ® LCD Display Allows user to set each valve station run time from 1 minute to 4 hours Run Times Allows 1 to 4 start times to be set in each program Start Times Station Number Indicates currently selected station number Program Designator Identifies program (A, B, or C) in use Day of the Week I have to check start times every year on my unit after it's been off (plugged in) over the Winter. It seems to have a mind of its own. But that's really the only likely culprit. If you check all start periods in every program and only have 1 start time programmed and this keeps happening then the controller is defective.

Step 4. Press the arrow (>) button to add an additional start time, or PRG button for the next program. Example: Program A has four stations (1-4) assigned to it and the program has one start time at 5:30 AM. At 5:30 AM, station 1 will water, followed by station 2, then station 3, and so on until all four stations have watered.

START TIME(S) 1. Turn the dial to the START TIMES position. 2. The factory preset is set on program A. You can select program B or C by pressing the button. 3. Use the or button to change the start time. (The start times advance in 15-minute increments). 4. Press the button to add an additional start time, or button for the next program.
HCC - Running Two Zones Simultaneously. The HCC controller has the ability to operate two Hunter valves at one time, therefore, allowing for more than one program to run at the same time. Only two programs can be allowed to run concurrently. This is a great feature if you have a short water window and the available water to feed multiple With easy-to-configure control for up to 8 stations, including 3 programs and 4 start times each, the X-Core is the perfect solution for residential applications. View Product X2â„¢ with WAND
Under the Water Days or Days to Water dial position on your controller you have three options. You can have the program run on specific days, an odd/even schedule, or an interval schedule. To move out of the Interval mode and back into one of your other two options simply continue pressing the or buttons. Eventually you should either see a icon
View online or download Hunter X-CORE Owners Manual And Programming Instructions, Instructions, Quick Start Manual. Setting the Program Start Time(S) 20. This entry-level residential controller offers simple operation with Smart Solar Sync compatibility. With easy-to-configure control, including 3 programs and 4 start times each, the X-Core is the perfect solution for residential applications. 6 stations: Enclosure: outdoor; Independent programs: 3; Start times per program: 4; Max. station run
SETTING A PROGRAM START TIME 1. Turn the dial to the START TIMES position. 2. Use the PRG button to select program (A, B, or C). 3. Use the + and – buttons to change the Start Time. The Start Time advances in 15-minute increments. 4. Press the button to add another Start Time, or PRG button to set a Start Time for the next program. 5.
.
  • 3lu8sb2h78.pages.dev/128
  • 3lu8sb2h78.pages.dev/10
  • 3lu8sb2h78.pages.dev/468
  • 3lu8sb2h78.pages.dev/465
  • 3lu8sb2h78.pages.dev/371
  • 3lu8sb2h78.pages.dev/418
  • 3lu8sb2h78.pages.dev/416
  • 3lu8sb2h78.pages.dev/18

    • hunter x core start times